----- Welcome to Dae-Ryong Industry's HomePage!-----

HYPER SEAL   DPS-200

One component hydrophilic Sealant

Uses

 HYPER SEAL DPS-200 can be used as an adhesive for bonding HYPER SEAL strips or as problem-solving of inauessible including sealing around joints in pro-cast manhole covers cable ducts and pipe,etc.
Sealing around pre-cast segments.
Sealing between rough surfaces, e.g. slurry walls and concrete slabs.
Sealing aroundH-beams and other penetration through concrete structures.
Sealing around conventional rubber and plastic waterstop to provide belt and braces seal prior to concrete pouring.

Advantages

 Fast curing : enables early concrete pour and rapid return to service. Allows hand-applied concrete cover within 8 hours on emergency repairs and large - scale concrete pour ater 24 hours
 Excellent seal : on rough concrete: improved water tightness. Plugs inequalities in rough concrete to produce a tight seal
 Excellent adhesion : Quick and easy to apply to a vaiety of damp and uneven joint surfaces remaining firmly in place during concrete pour
 Water swellable : Expands by 100% producing a watertight compression seal
 Durable : Excellent wet/dry cycling retaining elastic character and swelling performance due to high tolerance of the cementitious environment

Description

 HYPER-SEAL DPS-200 is a grey, elastic water-swellable paste which is applied like a sealant.
 The hydrophilic properties of HYPER SEAL DPS-200 display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.

Problem solving

 For waterproofing in problem and inaccessible areas, such as around joints in pre-cast manhole covers, cable ducts, around pipes, between slurry walls and concrete slabs and sealing around H beams. Can also be used as an adhesive for the HYPER SEAL range of hydrophilic waterstop.

High performance

 fast curing, enables early concrete pour and rapid return to service excellent seal on rouht surfaces, promoting improved  water tightness expand by100% when in contact with water, giving a watertight seal.

Druable

 Hihg wet/dry cycling performance-HYPER SEAL DPS-200 retains it's elastic characters and swellable performance due to a high tolerance of the cementitious environment.

Application method & Installation Photograph

 Cut conical tip off cartridge end-thread, screw on nozzle and cut to required size. Place HYPER SEAL conventional sealant. Extrude a bead of not less then 15mm diameter onto the subbstrate, ensuring that there is no break in the bead.

Down Load PDF Catarlog - (Need more detail information)